Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 315

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 297
¥ A Meridian 1 with two modules (two Application Modules, or two IPE
Modules, or one of each), one module with Meridian Link but not CCR
activated, one module with CCR but not Meridian Link activated:
Ñ VSID prompts (LD17) Use two VSID prompts to enter values to
define two different VAS IDs to be associated with the two AMLs.
Ñ AML prompts (LD17) Use two AML prompts to enter two ESDI
or MSDL port numbers to be associated with the two VAS IDs.
Ñ VSID prompt (LD15) Enter the value from the VSID prompt in
LD17 associated with the AML connected to the module with
Meridian Link activated.
Ñ VSID prompt (LD23) Enter the value from the VSID prompt in
LD17 associated with the AML connected to the module with CCR
activated.
Ñ HSID prompt (LD23) Enter the value from the VSID prompt in
LD17 associated with the AML connected to the module with
Meridian Link activated.
¥ A Meridian 1 with a single IPE Module or Application Module with
both Meridian Link and CCR activated:
Ñ VSID prompt (LD17) Enter a value to define the VAS ID to be
associated with the AML.
Ñ AML prompt (LD17) Enter the ESDI or MSDL port number to be
associated with the VAS ID.
Ñ VSID prompt (LD15) Enter the value from the VSID prompt in
LD17.
Ñ VSID prompt (LD23) Enter the value from the VSID prompt in
LD17.
Ñ HSID prompt (LD23) Do not enter a value.
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide