Software Installation Program And Pre-Programmed Data - Meridian Nortel 1 Option 11C Technical Reference Manual

Page 22 of 544 Memory, Storage and CPU capacity
Table 5
Benefits of pre-programmed data
Task performed using pre-
Task
programmed data
Activating Plug telephone into socket, lift
telephones handset, choose model,
choose extension
Activating Use the administration menu
trunks to add a trunk:
• enter a route access code
• enter a TN
• enter a trunk model
Establishing a No effort required. Default
numbering extension numbers become
plan active when telephones are
activated. Default plan is
sequential.

Software Installation program and pre-programmed data

553-3011-100 Standard 14.00
The Software Installation program is automatically invoked when the new
Option 11C or Option 11C Mini is started up (SYSLOAD). After successfully
responding to various prompts in the program, you are given the option of
selecting a database to be loaded.
Detailed information about the Software Installation program can be found in
the Option 11C Planning and Installation (553-3021-210) or the Option 11C
Mini Planning and Installation (553-3021-209) used for first-time
installations; or the Option 11C and 11C Mini Upgrade Procedures (553-
3021-250) used for upgrades from an Option 11 or 11E to an Option 11C
system.
January 2002
Task performed without using
pre-programmed data
Enter LD 10 or 11, enter telephone type,
specify TN, assign class of service, assign
a feature to each key on telephone
LD 10 has approximately 120 prompts
LD 11 has approximately 160 prompts
Enter LD 16, enter trunk type, access code,
signalling arrangements
Enter LD 14, enter TN, route member
number, signalling arrangements, class of
service, and so on
LD 16 has approximately 200 prompts
LD 14 has approximately 50 prompts
A numbering plan must be developed to
map TNs to DNs.