Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 513

Table 142
X.25 and LAPB parametersÑLink 1 (continued)
Link parameter
T12
T13
T14
T15
T16
Maximum T12 retries
Maximum T13 retries
Procedure 14: Changing Meridian Link (link 1) parameters (continued)
Allowed values
(defaults in parentheses)
0Ð(1800)Ð9999
0Ð(1800)Ð9999
0Ð(600)Ð9999
0Ð(1500)Ð9999
0Ð(1300)Ð9999
0Ð(3)Ð9999
0Ð(3)Ð9999
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Chapter 15: Link configuration 495
Amount of time (in 1/10 second
increments) the AM will wait for an
X.25 reset confirmation packet
after sending an X.25 reset
request packet to the host.
Amount of time (in 1/10 second
increments) the AM will wait for an
X.25 clear confirmation packet
after sending an X.25 clear
request packet to the host.
Amount of time (in 1/10 second
increments) the AM will wait for a
packet with any P(R) value after
sending an X.25 data packet to
the host.
Amount of time (in 1/10 second
increments) the AM will wait for a
packet with a P(R) value that
acknowledges a transmitted X.25
data packet to the host.
Amount of time (in 1/10 second
increments) the AM will wait for an
X.25 interrupt confirmation packet
after sending an X.25 interrupt
request packet to the host.
Maximum number of times the AM
sends reset requests due to T12
time outs.
Maximum number of times the
MLM sends clear requests due to
T13 time outs.
Ñ end Ñ
Description