Laserjet Series Iv Printer Switch Settings - Meridian Link/Customer Controlled Routing Installation And Upgrade Manual

LaserJet series IV printer switch settings

Use the [Menu] key on the front panel to check and set the options. Press
the [Menu] key to access the first group of settings. Hold the [Menu] key
down for about five seconds (the printer is offline) to access the second
group of settings. Press the + or Ð (minus) key until the correct setting
appears to change an option. Press [Enter]/[Reset Menu] to save a selection.
Press the [Menu] key to continue. Press the [Online] key to exit from the
menu.
Table 101 shows the correct option settings for use with CCR.
Table 101
LaserJet series IV printer switch settings
Press [Menu] key to see the
Printing Menu
COPIES = 01
PAPER = LETTER
ORIENTATION = P
FORM = 66
MANUAL FEED = OFF
RET = DARK
Press [Menu] key twice to see
the Configuration Menu
MP TRAY = CLASS
LOCK = NONE
CLR WARN = ON
AUTO CONT = ON
DENSITY = 3
LOW TONER = ON
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Chapter 10: Installing peripheral devices 271
Press [Menu] key once to see
the PCL Menu
FONT SOURCE
FONT NUMBER
SYM SET
PAGEPROTECT = OFF
RESOLUTION
TIMEOUT
Press [Menu] key three times to
see the Printing Menu
SERIAL
PACING
BAUD RATE
ROBUST XON
DTR POLARITY
= 1
= 45
= ISO L1
= 300
= 15
= RS-232
= XON/XOFF
= 9600
= ON
= HI