Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 370

352 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
Table 133
LD 10ÑCreating a Phantom Set (continued)
Prompt Response
CUST 0-99
¥
¥
¥
CLS NDD
CLS (DNDD)
¥
¥
¥
AST 00
IAPG (0)Ð15
ITNA (NO), YES
DGRP (1)Ð5
¥
¥
¥
KEY xx SCR yyyy
CLS xx RLS
Comment
Customer number
Press [Return] until the CLS prompt
appears.
No digit display is recommended if
configuring phantom devices.
Dialed Name Display denied is
recommended if configuring
phantom devices.
Press [Return] until the AST prompt
appears.
Key 0 is AST.
Meridian Link Unsolicited Status
Message (USM) group. These
groups determine which status
messages are sent for an AST set.
The default 0 sends no messages,
whereas Group 1 sends all
messages.
Idle TN for third-party application.
Select YES for Phantom TN.
Device group with which phantom
TNs are associated.
Press [Return] until the KEY
prompt appears.
Key number, Single Call Ringing,
DN
Key number, Releases.
Ñ end Ñ