Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 321

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 303
Table 107
LD 48ÑLink Diagnostic (continued)
Command
DIS MSGI/MSGO
xx yy
FLSH
STAT MON
ENL PACI/PACO
DIS PACI/PACO
xx
ENXM
MSGI/MSGO xx
<msg> <msg>
DSXM
MSGI/MSGO xx
ENIM
MSGI/MSGO xx
<msg> <msg>
DSIM
MSGI/MSGO xx
DSXP
MSGI/MSGO xx
ENIP
MSGI/MSGO xx
yy
DSIP
MSGI/MSGO xx
ENXT
MSGI/MSGO xx
<l> <s> <c> <u>
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Comment
Disable message input/output monitoring (xx=link,
yy=priority)
Disable monitor and trash buffers
Get status of message monitoring
Enable packet input/output monitoring (xx=link)
Disable packet input/output monitoring (xx=link)
Enable message input/output monitoring
excluding those messages specified (xx=link)
Disable exclusive message monitoring (xx=link)
Enable inclusive message input/output monitoring
of only those messages specified
(xx=link)
Disable inclusive message monitoring (xx=link)
Disable exclusive priority message monitoring
(xx=link)
Enable inclusive message input/output monitoring
of only those messages with specified priorities
(xx=link, yy=priority)
Disable inclusive priority message monitoring on
link xx
Enable message input/output monitoring
excluding messages with specified TN on link xx
ÑcontinuedÑ