Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 346

328 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
If, in a block of DNIS numbers, all numbers start with the same two or three
digits, and if all numbers are to be translated to the same ACD DN, the
program does not need translation entries for all numbers in the block. For
example, if DNIS numbers 4400 through 4499 all go to ACD DN 8900, the
following can be used.
Table 120
LD 49ÑDefining a block of DNIS numbers
Prompt Response
REQ NEW
TYPE IDC
¥
¥
¥
DCNO 0Ð254
IDGT 44
44 8900
IDGT <cr>
REQ NEW, END
Comment
Create data in the database
Incoming Digit Conversion
Press [Return] until the DCNO prompt
appears
Translation table number
Incoming digits (the DNIS number)
All DNIS numbers starting with 44 will go to
ACD DN 8900
End of modifying for this translation table
Either create a new translation table or exit
the overlay, saving the new translation table