Defining A Network Console Packet - Avery Dennison Monarch Tabletop Printer 2 Reference Manual

D e f i n i n g a N e t w o r k C o n s o l e P a c k e t
Use the network cons ole pac ket to send c onsole commands direc tly to the wireless module via
the printer's s erial port. If the wireles s module does not appear to be c omm unic ating with the
printer, use the network c ons ole packet to change the printer's SSID, IP Addres s, etc .
Syntax {N,numbe r,action,device,"name " |
C,"con_co mds" | }
N1. N
N2. num ber
N3. action
N4. device
N5. "nam e"
C1. C
C2. "c on_c om ds "
Exam ple
{N,1 ,A,T,"mystore" |
C,"s e t ip me s tatic" |
C,"init" |
C,"e x it" | }
Sends the network console pac ket m ys tore direc tly to the wireless m odule (T ) and sets the IP
method to static for determ ining the IP Address es. The Init and Exit com mands mus t be used to
save changes and initializ e the wireless module.
2-28 Packet Reference Manual
Network Cons ole Packet.
Number from 0 to 999 to identify the network console packet. 1 is
the default.
Action. Enter A to add a network cons ole packet.
Storage devic e. Enter T to pas s the pac ket through the printer
and store the packet in the wireless module.
Pac ket name, 0 to 8 characters, enc lose within quotation m arks.
" " is the default.
Command field.
Cons ole commands. Must be enclosed within quotation m arks.
" " is the default. Each command must be on a s eparate line. The
m axim um number of characters per c omm and is 100. Refer to the
lis t of cons ole c ommands in the Monarc hNet2 Operating
Instructions for more information.
Note : The m aximum number of c omm ands per packet is twenty five
(25).
Classification: Avery Dennison – Public