Protocol Mode Ipv4/Ipv6 - Unify OpenStage 60 Administration Manual

Openstage sip v3r3 for openscape voice
Hide thumbs Also See for OpenStage 60:
Table of Contents

Advertisement

administration.fm
Administration
IP Network Parameters
3.3.2

Protocol Mode IPv4/IPv6

An IPv4 address consists of 4 number blocks, each between 0 and 255, separated by ".".
Example:
1.222.44.123
An IPv6 address consists of 8 hexadecimal number blocks, separated by ":".
Example:
2001:0db8:85a3:08d3:1319:8a2e:0370:7347 or, if not all blocks are used:
2000:1::3
Administration via WBM
Network > General IP configuration
Set the Protocol Mode to "IPv4" or "IPv6" or both (the default setting is IPv4_IPv6). Afterwards,
click Submit.
General IP configuration
Protocol Mode
IPv4_IPv6
LLDP-MED Enabled
DHCP Enabled
DHCPv6 Enabled
VLAN discovery
Manual
VLAN ID
DNS domain
Primary DNS
192.168.1.105
Secondary DNS
192.168.1.2
HTTP proxy
Submit
Reset
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- General IP Configuration
|
--- Protocol Mode
64
;
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
A31003-S2030-M100-11-76A9, 01/2015

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openstage 80Openstage 20Openstage 15Openstage 40

Table of Contents