Specific Ip Routing - Unify OpenStage 60 Administration Manual

administration.fm
Administration
IP Network Parameters
3.3.6

Specific IP Routing

To have constant access to network subscribers of other domains, you can enter a total of two
more network destinations, in addition to the default route/gateway. This is useful if the LAN
has more than one router.
IPv4 Route Configuration
Data required
• Route 1/2 IP address: IP address of the selected route.
Route 1/2 gateway: IP address of the gateway for the selected route.
•
• Route 1/2 mask: Network mask for the selected route.
Administration via WBM
Network > IPv4 configuration
Enter the IP address of the router that links your IP network to other networks. Click Submit.
IPv4 configuration
LLDP-MED Enabled
DHCP Enabled
DHCP lease reuse
192.168.1.235
IP address
Subnet mask 255.255.255.0
192.168.1.2
Default route
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
Submit Reset
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- IPv4 configuration
|--- Route 1 IP
|--- Route 1 gateway
|--- Route 1 mask
|--- Route 2 IP
|--- Route 2 gateway
|
--- Route 2 mask
72
;
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
A31003-S2030-M100-11-76A9, 01/2015