Set The Terminal Number; Basic Network Configuration - Unify OpenStage 60 Administration Manual

inbetriebnahme.fm
Startup
Quick Start
2. Click on the tab "Administrator Pages". In the dialog box, enter the admin password:
Admin Login
Enter Admin password:
Login Reset
3. The administration main page opens. The left column contains the menu tree. If you click
on an item which is printed in normal style, the corresponding dialog opens in the center
of the page. If you click on an item printed in bold letters, a sub-menu opens in the right
column.
2.3.2

Set the Terminal Number

If the user and administrator menus are needed in the course of setup, the terminal number,
which by default is identical with the phone number, must be configured first. When the phone
is in delivery status, the terminal number input form is presented to the user/administrator right
after booting, unless the Plug&Play facility of the DLS is used. For further information about this
setting, please refer to Section 3.5.1.1, "Terminal Identity". With the WBM, the terminal number
is configured as follows:
In the left column, select System > System Identity to open the "System Identity" dialog. Enter
the terminal number, i. e. the SIP name / phone number.
System Identity
4711
Terminal number
Terminal name
openstage
Display identity 4711
Enable ID
Web name
DNS name construction
Only number
Submit
2.3.3

Basic Network Configuration

For basic functionality, DHCP must provide the following parameters:
• IP Address: IP Address for the phone.
• Subnet Mask (option #1): Subnet mask of the phone.
Default Route (option #3 "Router"): IP Address of the default gateway which is used for
•
connections beyond the subnet.
• DNS IP Addresses (option #6 "Domain Server"): IP Addresses of the primary and
secondary DNS servers.
If no DHCP server is present, see Section 3.3.4, "IP Address - Manual Configuration" for IP ad-
dress and subnet mask, and Section 3.3.5, "Default Route/Gateway" for the default route.
26
;
Reset
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
A31003-S2030-M100-11-76A9, 01/2015