Default Port List - Unify OpenStage 60 Administration Manual

4.2

Default Port List

The following table contains all default ports, resp. port ranges, and protocols used by the ser-
vices running on OpenStage SIP phones.
Service
Payload transport (VoIP)
Payload transport (VoIP)
SIP subscriber - TCP is used
SIP subscriber - TLS is used
SIP subscriber - UDP is used
XML applications in phone, connec-
ting to an application server
XML Push service
XML Push service
Directory access via LDAP
Directory access via LDAP
DHCP Client
DNS Client
DLS contact me service - workpoint
side
Default communication with the DLS
workpoint interface
Secure communication with the DLS
workpoint interface
Connection to the control port of FTP
server
FTP client; uses the FTP server in
active mode
HTTPS file download server
Client application which sends QDC
data to the QCU
Part of SNMP-Agent - sending Traps ---
Part of SNMP-Agent - receive Set/
Get commands
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
Server De- Client Default
fault Port Port
5010 - 5059 5010 - 5059
5010 - 5059 5010 - 5059
5060 32786 - 61000
5061 32786 - 61000
5060 5060
--- 32786 - 61000
8085 ---
443 ---
--- 32786 - 61000
--- 32786 - 61000
--- 68
--- 1024 - 65535
8085 ---
--- 18443
--- 18444
21 32786 - 61000
32786 - 61000 20
443 32786 - 61000
--- 32786 - 61000
32786 - 61000
161 ---
referenz.fm
Technical Reference
Default Port List
Protocol Stack
RTP - RTCP
SRTP - SRTCP
SIP / TCP
SIP / TLS
SIP / UDP
HTTP / TCP
HTTPS / TCP-TLS
HTTP / TCP
HTTPS / TCP-TLS
TCP
TCP- SSL/TLS
DHCP / UDP
DNS / TCP_UDP
HTTP / TCP
HTTPS / TCP -
SSL / TLS
HTTPS / TCP -
SSL / TLS
FTP / TCP
FTP / TCP
HTTPS / TCP -
SSL/TLS
SNMP / UDP
SNMP / UDP
SNMP / UDP
373