How To Set Up And Deploy A Dial Plan - Unify OpenStage 60 Administration Manual

beispiele.fm
Examples and HowTos
Dial Plan
5.5.3

How To Set Up And Deploy A Dial Plan

For creating and deploying a dial plan to an OpenStage phone, a working installation of the DLS
(version V2R4 onwards) is required. This HowTo describes the creation of a simple dial plan
for OpenStage phones by example. Unless otherwise stated, the actions described underneath
are made in the DLS.
1. Log on to the DLS with an account that has suitable rights for deploying a dial plan. For
details, please refer to the Deployment Service Administration Manual.
2. Navigate to IP Devices > IP Phone Configuration > Features > "Dialplan" tab.
Check Dialplan, if not checked already.
3.
Enter a suitable Dialplan ID.
4.
5. Click on to create the first dial plan rule.
6. Enter the following data:
Parameter
Digit string
Action
Minimum length
Maximum length 4
Timer
Summary: This rule determines that digit strings which begin with 3 and have a length of 4
digits are sent to the server without delay after the last digit has been entered.
398
Value Description/Remarks
This rule matches numbers beginning with 3. For in-
3
stance, theses might be internal numbers.
When all criteria are met, the number is sent to the ser-
S
ver.
4 This rule matches numbers with a length of 4 digits.
The specified Action will take place without delay when
0
all other criteria are met.
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
A31003-S2030-M100-11-76A9, 01/2015