Blind Call Transfer / Move Blind; Join Two Callstransfer Call - Unify OpenStage 60 Administration Manual

administration.fm
Administration
Free Programmable Keys
3.8.9

Blind Call Transfer / Move Blind

A call is transferred without consultation, as soon as the phone goes on-hook or the target
phone goes off-hook.
This feature can be enabled or disabled under System > Features > Feature access
>
(see Section 3.6, "Feature Access").
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys > Blind transfer
Blind transfer
Blind transfer
Key.label 3
Submit Reset
3.8.10

Join Two CallsTransfer Call

Call transfer, applicable when there is one active call and one call on hold. The active call and
the held call are connected to each other, while the phone that has initiated the transfer is dis-
connected.
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys > JoinTransfer Call
Join
Key.label 3 Transfer Call
Submit Reset
156
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
A31003-S2030-M100-11-76A9, 01/2015