Call Transfer; Transfer On Ring; Transfer On Hangup - Unify OpenStage 60 Administration Manual

3.7.5

Call Transfer

3.7.5.1

Transfer on Ring

If this function is active, a call can be transferred after the user has dialled the third participant's
number, but before the third party has answered the call. This feature is enabled or disabled in
the User menu. The default is "Yes".
Administration via WBM (User menu)
User > Configuration > Outgoing calls
Outgoing calls
Autodial delay (seconds)
Allow callback
Allow busy when dialling
Allow transfer on ring
Allow immediate dialling
Submit
Administration via Local Phone (User menu)
|
--- User
|
--- Configuration
|
--- Outgoing calls
|
--- Transfer on ring
3.7.5.2

Transfer on Hangup

This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the
call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled,
and A goes on-hook, B gets connected to C. If disabled, C will be released when A hangs up,
and A has the possibility to reconnect to B. By default, the feature is disabled.
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
6
;
;
Reset
administration.fm
Administration
Feature Configuration
135