Screensaver; Ftp/Https Access Data - Unify OpenStage 60 Administration Manual

administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.16.8

Screensaver

The screensaver is displayed when the phone is in idle mode. It performs a slide show consist-
ing of images which can be uploaded using the web interface.
Screensavers are available only on OpenStage 60/80 phones.
>
The file size for a screensaver image is limited to 300 KB. If the file is too large or
>
the contents of the file are not valid, the file will not be stored in the phone.
For screensaver images, the following specifications are valid:
• Data format: JPG or PNG. JPG is recommended.
• Screen format: 4:3. The images are resized to fit in the screen, so that images with a width/
height ratio differing from 4:3 will appear with deviant proportions.
• Resolution: The phone's screen resolution is the best choice for image resolution:
• OpenStage 60: 320x240
• OpenStage 80: 640x480
3.16.8.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see Section 3.16.2, "Common FTP/HTTPS Set-
tings") are to be used, Use default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in any case)
Use default: Specifies whether the default FTP/HTTPS access settings shall be used.
•
Value range: "Yes", "No"
Default: "No"
Filename: Specifies the file name of the phone software.
•
• After submit: Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• Server address: IP address or hostname of the FTP/HTTPS server in use.
230
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
A31003-S2030-M100-11-76A9, 01/2015