inbetriebnahme.fm
Startup
Assembling and Installing the Phone
OpenStage 40 (OpenStage 15 and 20 similar, except
Power supply
Key Module
2.2.3
Assembly
Insert the plug on the long end of the handset cable into the jack
phone and press the cable into the groove provided for it. Next, insert the plug on the short end
of the handset cable into the jack on the handset.
2.2.4
Connecting the Phone
1.
Plug the LAN cable into the connector
cable to the LAN resp. switch. If PoE (Power over Ethernet) is to be used, the PSE (Power
Sourcing Equipment) must meet the IEEE 802.3af specification.
For details about the required power supply, see the following table:
Model
OpenStage 15
OpenStage 15 G
OpenStage 20 E
OpenStage 20
OpenStage 20 G
OpenStage 40
22
[1]
1
1
2
, OpenStage 40 US
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
1
)
PC
at the bottom of the telephone and connect the
Power Consumption/Supply
Power Class 1
Power Class 2
Power Class 1
Power Class 1
Power Class 2
2
Power Class 2
[1] OpenStage 40 andd
Switch
[1]
Headset
Handset
on the base of the tele-
A31003-S2030-M100-11-76A9, 01/2015