Immediate Ring; Direct Station Select (Dss) - Unify OpenStage 60 Administration Manual

• if Preselection is selected then the line status is displayed after 1st line press
• if Single button is selected then bridging is invoked (if line busy, bridging enabled)
In case the Preview key is pressed first and then the line key, the Preselection mode configu-
ration is not relevant.
• if Preview mode is activated then the Preview key LED remains on (preview mode must be
deactivated manually by pressing the Preview key again).
• if Preview mode is deactivated then the Preview key LED is turned off after preview timer
expiry
– if Bridging priority= Bridging overrides preview then pressing the busy line key invokes
bridging
– if Bridging priority= Preview overrides bridging then pressing the line key displays the
line status, however pressing the line key twice bridging will be invoked.
3.11.4

Immediate Ring

Enables or disables the preset delay for all line keys. This feature only applies to keyset lines.
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys > Immediate ring
Immediate ring
Key.label 3 Immediate ring
Submit Reset
3.11.5

Direct Station Select (DSS)

This feature is available only on OpenStage 15/40/60/80, and requires OpenScape
>
Voice.
This feature can be enabled or disabled under System > Features > Feature access
>
(see Section 3.6, "Feature Access").
A DSS key is a special variant of a line key. It enables a direct connection to a target phone,
allowing the user to pick up or forward a call alerting the DSS target and make/complete a call
to the DSS target.
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
Administration
Multiline Appearance/Keyset
185