Examples And Howtos; Canonical Dialing; Canonical Dialing Settings - Unify OpenStage 60 Administration Manual

5

Examples and HowTos

5.1

Canonical Dialing

5.1.1

Canonical Dialing Settings

The following example shows settings suitable for the conversion of given dial strings to canon-
ical format. The example phone is located in Nottingham, UK.
Parameter
Local country code
National prefix digit
Local national code
Minimum local number
length
Local enterprise node
PSTN access code
Operator codes
Emergency numbers
Initial extension digits
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
Example value Explanation
44 International country code for the UK.
0 Used in front of national codes when dialled
without international prefix.
115 Area code within the UK (here: Nottingham).
7 Minimum number of digits in a local PSTN
number (e. g. 3335333 = 7 digits).
780 Prefix to access Nottingham numbers from
within the Siemens network.
9 Prefix to make an international call in the UK.
0,7800 Set of numbers to access the local operators.
(No blank after comma, or else the subsequent
entry is ignored.)
999,555 Set of numbers to access emergency ser-
vices. (No blank after comma, or else the sub-
sequent entry is ignored.)
st
2,3,4,5,6,8 1
on numbers on the local node. (No blank after
comma, or else the subsequent entry is igno-
red.)
Examples and HowTos
digits of numbers that are used for extensi-
beispiele.fm
Canonical Dialing
377