3.27
Bluetooth (OpenStage 60/80)
The Bluetooth interface can be enabled or disabled in the admin menu. By default, it is enabled.
If Bluetooth is enabled, the user has the possibility to activate or deactivate it via the user menu.
This parameter can also be configured under System > Features > Feature access
>
> Bluetooth (see Section 3.7, "Feature Configuration") or Bluetooth > Enable Blue-
tooth interface.
Additionally, the Bluetooth address is displayed.
Administration via WBM
System > Features > Configuration
Configuration
General
Emergency number
Voice Mail number
MWI LED
Missed call LED
Allow refuse
Hot/warm phone
Hot/warm destination
Initial digit timer (seconds)
Allow uaCSTA
Server features
Not used timeout (minutes)
Transfer on hangup
Bridging enabled
Dial plan enabled
FPK program timer
Audio
Group pickup tone allowed
Group pickup as ringer
Group pickup visual alert
BLF alerting
MLPP ringer
Callback ringer
Impact level ringer
Bluetooth
Enable Bluetooth interface
Call Recording
Recorder Address
Recording Mode
Audible Notification
Submit
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
3335
Key & AlertBar
Key only
;
No action
30
;
5
;
;
On
;
;
Prompt
Beep
;
Disabled
Off
Reset
administration.fm
Administration
Bluetooth (OpenStage 60/80)
303