Fax Function/External Connection (Ext Port) Function Check; Outline; Fax Function And External Connection Function Check - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
3.6 Fax Function/External Connection (EXT port)
Function Check

3.6.1 Outline

Fax function/External connection (EXT port) function must be checked in addition to
usual printing/scanning function after repairing/refurbishing the defective units. The
following table describes each check method. Select an applicable Fax Function check
method in your repair center and implement this operation.
Table 3-34. Fax Function/EXT port Function check
Checked Check
Necessary Tools
Function Method
• PC (OS: Win XP)
Method A *1
• Repaired/Refurbished unit (1unit)
(PC FAX)
• Telephone line simulator*
(p.83)
• Fax cable (2pcs.)
• Guaranteed unit
(e.g. EPSON WorkForce 600/EPSON
*1
Method B Stylus OFFICE TX600FW/
(Only BX600FW/EPSON Stylus SX600FW/
simulator) ME OFFICE 700FW)
Fax (p.87) • Repaired/Refurbished unit (1unit)
Function • Telephone line simulator*
• Fax cable (2pcs.)
• Guaranteed unit
(e.g. EPSON WorkForce 600/EPSON
Stylus OFFICE TX600FW/
Method C
BX600FW/EPSON Stylus SX600FW/
(PBX FAX)
ME OFFICE 700FW)
(p.88)
• Repaired/Refurbished unit (1unit)
• PBX in your office (internal phone)
• Fax cable (2pcs.)
External
• Telephone
Connection
--- *2 (1pcs.)
(EXT port)
• Fax cable (1pcs.)
Function
Note *1 : In case of these methods, you have to use telephone line simulator for checking fax
function. For your reference, web site address of the simulator is outlined below.
(as of August 2007)
http://www.telephonetribute.com/telco_line_simulators.html
http://www.skutchelectronics.com/sims.htm
*2 : You have to check this test whether you select any check method above.
TROUBLESHOOTING
Check Point
1 (1pcs.)
[Sender's check point]
Make sure that printer
send fax data correctly.
1
(1pcs.)
[Receiver's check point]
Make sure that printer
receive fax data correctly.
1. Check if you can hear ringing tone from
telephone before receiving fax. In this case,
the telephone sounds ringing.
2. Check if you can't hear dial tone from the
telephone during receiving fax data. In this
case, the telephone doesn't sound dial tone.

Fax Function/External Connection (EXT port) Function Check

3.6.2 Fax Function and External Connection Function Check

The following shows the detailed check condition/procedure of each method.
3.6.2.1 Fax Function Check by [Method A] and External
Connection Function Check
SETTING METHOD
Fax cable
Telephone line
PC
Fax cable
simulator
*Regarding FAX number, refer
to the telephone line simulator's
manual.
Table 3-35. Default Settings of Repaired
EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON
Stylus SX600FW/ME OFFICE 700FW ("R")
No Function
1 Resolution
2 Contrast
3 Paper size
4 Automatic reduction
5 Last transmission report
6 Dial mode
7 DRD
8 ECM
9 V.34
10 Rings to answer
Note * : This default setting is applied for [Condition B] and [Condition C].
Revision A
Telephone
Repaired/refurbished
EPSON WorkForce 600/
EXT port
EPSON Stylus OFFICE
TX600FW/BX600FW/
Fax cable
EPSON Stylus SX600FW/
ME OFFICE 700FW
Line port
*Repaired/refurbished EPSON WorkForce 600/
EPSON Stylus OFFICE TX600FW/BX600FW/
EPSON Stylus SX600FW/ME OFFICE 700FW is
represented by "R" unit from this.
*Select default setting to "R" unit before this
check referring to the following table.
Default Setting
Standard
Normal
For US, Canada, Latin:"Letter"
For other destinations:"A4"
On
Off
Tone
All
On
On
"5"
*For Taiwan, Singapore: "2"
Confidential
83