Interface; Usb Interface; Fax Interface; Network Interface - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

1.5 Interface

The following is the specifications of the USB Interface, Network Interface, FAX
Interface, and Memory Card Slot mounted on this printer.

1.5.1 USB Interface

The table below describes the specifications of the two USB ports; USB device port for
connecting with a host such as a computer, and the USB host port for connecting with
an external devices such as a DSC (digital still camera).
Table 1-13. USB Interface Specifications
Item USB Device port
• Universal Serial Bus
Specifications Revision 2.0
• Universal Serial Bus Device
Class Definition for Printing
Compatible standards
Devices Version 1.1
• Universal Serial Bus Mass
Storage Class Bulk-Only
Transport Revision 1.0
Transfer rate
480 Mbps (High Speed)
Data format
Compatible connector
USB Series B
Max. cable length
Note* : External devices that can be connected to the USB device port are:
DSC compliant with the USB Direct Print Protocol specification Rev 1.0
DSC compliant with the CIPA DC-001-2003 (PictBridge) specifications
Table 1-14. Device ID
When IEEE 1284.4 is Enabled
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX,ESCPR1;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
PRODUCT DESCRIPTION
USB Host port*
• Universal Serial Bus
Specifications Revision 2.0
480 Mbps (Max.)
NRZI
USB Series A
2 [m] or less
When IEEE 1284.4 is Disabled
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,ESCPR1;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
The " " is replaced as shown in the following table.
Model Name
Table 1-15. Model Names Indicated in the Device ID
Destination
North America
Euro
Euro (Office)
Latin/Asia/Pacific
China

1.5.2 FAX Interface

Port Name Connector
Line port RJ11
EXT port RJ11

1.5.3 Network Interface

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON
Stylus SX600FW/ME OFFICE 700FW can be connected to the network via Wired or
Wireless LAN connection. (They can not be used simultaneously.) The following
describes each Interface.
Wired LAN
The following interface is equipped for the Wired LAN connection. The
communication mode can be selected from auto setting or fixed setting.
Item
Connector
Communication Speed
Note* : 10Base-T/100Base-TX Ethernet is supported. MDI/MDI-X is selected automatically.
Interface
Model Name
WorkForce 600
Stylus SX600FW
Stylus Office BX600FW
Stylus Office TX600FW
ME Office 700FW
Description
Connects to phone cable from modular wall jack.
Connects to TAM or Telephone.
Table 1-16. Wired LAN
Content
RJ-45 receptacle*: 1 port
For either 10Base-T or 100Base-TX, the Full Duplex or Half
Duplex can be selected.
Revision A
19
Confidential