Epson WorkForce 600 Service Manual page 161

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
Setting procedure
The MAC address required on the Adjustment Program is written
C A U T I O N
on the MAC address label on the MB Upper Shield Plate. Make sure
to correctly enter the address.
Figure 5-13. MAC Address Label
1. Connect the printer and a computer using a LAN cable.
2. Start the Adjustment Program.
3. Select the "Initial Setting" from the menu. The initial setting screen appears.
4. Enter the last six digits of MAC address into the MAC address entry field, and
click the MAC Address input button.
(Enter the address again into the second entry field to confirm it.)
5. Select the network status sheet print menu on the printer's control panel, and print
the sheet. Check the MAC address printed on the sheet to see if it is correct.
ADJUSTMENT
Label, MAC Address
The last 6 digits of MAC Address
Using the Adjustment Program (TBD)
Figure 5-14. MAC Address Setting Screen
Revision A
162
Confidential