Various Settings (Setup Mode) - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

1.7.4 Various Settings (Setup Mode)

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON
Stylus SX600FW/ME OFFICE 700FW provides various configuration and
maintenance. They can be done by selecting "Setup" from the menu on LCD. The
following explains the outline of these menu functions.
Table 1-39. Menu List for Setup Mode
Item
The current ink levels of each of the cartridges are displayed
in bar chart by the rules described below. After displaying
the ink levels, the next operation can be selected from the
following two options; "End the ink levels display" or
"Change Ink Cartridge".
• The bar chart is displayed in the order of cyan, magenta,
yellow, and black from the left.
Ink Levels
• When initial filling is completed, or after replacing the
cartridge, the ink level becomes 100% (full).
• The ink level is indicated in increment of 1%. Lower than
1% is rounded down.
• When the remaining ink level becomes lower than
approximately 10% (ink low status), zero will be
displayed.
Runs various maintenance for the printer. The following
shows each menu.
• Nozzle Check
A nozzle check pattern to check the Printhead nozzles
status is printed. A head clean-ing can be run if necessary.
(Refer to
• Head Cleaning
Runs a printhead cleaning. The cleaning cannot be made
when low ink level is detected. In such case, an ink low
error is displayed instead of running the cleaning.
Maintenance
• LCD Contrast
• Head Alignment
Adjustment to improve the bi-directional print quality.
Head alignment icon and the instructions for the
adjustment are displayed on the LCD.
• Change Ink Cartridges
Runs an ink cartridge replacement sequence. This can be
done from the Ink Level menu or by following the
instructions on the LCD when an ink-related error occurs.
PRODUCT DESCRIPTION
Function
Figure 1-10 for Printout pattern.)
Specification for Each Function
Table 1-39. Menu List for Setup Mode
Item
Changes settings for the printer. The menu is described
below.
• Sound
Sets ON/OFF for sound output.
• Display Format
The screen when displaying a photo can be selected from
the following three types.
Printer Setup
1-up with Info
1-up without Info
View Thumbnail Images
• Date/Time
• Daylight Saving Time
• Country/Region
• Language
Changes settings for Network.
• Confirmation of Network Settings
Displays the current settings. Status Sheet can be printed.
(Refer to
• General Network Settings
Changes settings for printer name and TCP/IP (auto/
Network Settings
manual).
• Wireless LAN Setup
Enabling/disabling Wireless LAN.
• File Sharing Setup
Changes settings of the files in a memory card for file
sharing via network.
Changes settings for FAX. Refer to
Fax Setting
(FAX Mode) ( p. 36 )
Bluetooth Settings Changes settings for Bluetooth.
Revision A
Function
Figure 1-11.)
" 1.7.5 FAX Function
".
Confidential
34