Disassembling The Scanner Unit; Separating The Scanner Unit And The Adf Unit - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

4.6 Disassembling the Scanner Unit

4.6.1 Separating the Scanner Unit and the ADF Unit

Parts/Components need to be removed in advance
Scanner Unit/ADF Unit
Removal procedure
1. Remove the screw (x1) and remove the Scanner Cable Cover.
2. Peel off the acetate tape bundling the ADF Sensor Cable, ADF Motor Cable,
Scanner Motor Cable and the grounding wires (x2) together.
3. Release the cables (x5) from the rib (1).
4. Remove the ADF Sensor cable from the rib (2) and separate the cables (x5)
into the ADF Motor cable, ADF Sensor cable, Scanner Motor cable and the
grounding wires (x2).
Scanner Cable Cover
Acetate tape
Cables (x5)
Figure 4-114. Separating the Cables
DISASSEMBLY/ASSEMBLY
ADF Sensor cable
Rib (2)
Rib (1)
C.B.P. 3x8, F/Zn-3C (6±1kgfcm)
Rib
Disassembling the Scanner Unit
5. Remove the ferrite core from the ADF Motor cable.
Ferrite core
ADF Motor cable
Figure 4-115. Removing the ADF Unit (1)
6. While lifting the ADF Unit, release the hooks (x2) of the Scanner Unit that
secure the ADF Hinges (x2) with a flathead precision screwdriver.
ADF Hinge
ADF Hinge
Hooks
Figure 4-116. Removing the ADF Unit (2)
Revision A
Attach the ferrite core as shown
at the marking on the cable.
135
Confidential