General Operation Procedure - Epson WorkForce 600 Service Manual

Hide thumbs Also See for WorkForce 600:
Table of Contents

Advertisement

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

1.7.3.3 General Operation Procedure

Before connecting the DSC, check that the printer is in the
C H E C K
P O I N T
following status.
• No print job from a computer is processed or performed.
• Direct print from a memory card is not processed or performed.
• Stand alone copy using the scanner function is not operating.
• No paper out error or ink out error is occurring.
The DSC direct print procedure differs depending on the DSC specifications. The
following explains common procedure.
1.
Setting on the printer
Before connecting a DSC with a USB cable, make the print settings such as paper
type/size, layout setting on the printer. This may not be required for some DSCs.
2.
Setting on the DSC
Make the following settings on the DSC before connecting it to the printer. Some
DSCs may require to first connect to the printer for making the settings.
• When printing multiple images, specify images and number of copies using
the DPOF and Multiple Sheet menus. The menus may not be available on
some DSCs.
• When printing a single image
Specify an image and the number of copies. Specifying the number of
copies may not be available on some DSCs.
• Select the paper type/size, layout, and make the Fit to Frame setting if
necessary. These settings may not be available on some DSCs.
3.
Starting to print
When the print settings on both the printer and the DSC is completed, follow the
procedure below to start printing.
1.
Connect the printer and the DSC with a USB cable. Using a USB cable
included in the DSC package is recommended.
2.
Operate the DSC to start printing.
3.
Printing is carried out according to the settings made on the DSC. When some
print settings have not been made on the DSC, the corresponding settings
made on the printer are applied.
PRODUCT DESCRIPTION
1.7.3.4 Operations when a DSC is connected
Operation
Connecting
DSC
(print start)
Canceling
printing
After printing
is completed
Exclusion
control
Specification for Each Function
Table 1-38. Operations during Connecting DSC
Specifications
When a DSC is connected as described in
Procedure ( p. 33 ) "
Step 3-1, EPSON WorkForce 600/EPSON Stylus OFFICE
TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
displays PictBridge logo on the LCD.
A print job can be canceled from the DSC.
The [Stop/Clear setting] button also cancels the print job.
When performing memory card direct print after printing from a DSC, the
USB cable connecting the DSC must be disconnected from the printer in
advance.
Print settings made on both the DSC and the printer can become impossible
settings for the printer due to unsupported combination of paper type, paper
size and layout. In such case, the print settings are automatically changed as
follows.
The settings made on the DSC are maintained. Any print setting items that are
not specified by the DSC are changed in accordance with the DSC settings.
When the paper type is changed, changed to Prem. Glossy, when the paper
size is changed, changed to 4x6 size. And when the layout is changed,
changed to Borderless layout.
Revision A
" 1.7.3.3 General Operation
33
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents