Epson WorkForce 600 Service Manual page 57

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
Occurrence
timing Detailed phenomenon
CR position
• Operation
The top edge of paper is not loaded to the
PF Roller Unit.
• –
Note * : In case that the paper jam error occurs in each operation, the jammed paper contacts the nozzle surface of the Print Head and the Print Head may be damaged.
TROUBLESHOOTING
Table 3-6. Check point for Paper jam error according to each phenomenon
Defective
unit/part name
1. Check if the Upper Paper Guide Unit is correctly
assembled.
Upper Paper Guide
Unit*
Error Indications and Fault Occurrence Causes
Check point
Upper Paper Guide Unit
Revision A
Remedy
1. Reassemble the Upper Paper Guide Unit to the
Main Frame correctly.
Confidential
58