Epson WorkForce 600 Service Manual page 92

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
Disassembling the Scanner Unit
Start
" 4.6.1 Separating the Scanner Unit and the ADF
Unit " (p135)
" 4.6.2 Upper Scanner Housing " (p136)
" 4.6.3 Scanner Carriage Unit " (p137)
DISASSEMBLY/ASSEMBLY
" 4.6.1 Separating the Scanner Unit and the ADF
" 4.7.2 ADF Cover Assy/ADF Left Cover " (p140)
" 4.6.4 Scanner Motor Unit " (p138)
" 4.7.4 ADF Right Cover/ADF Rear Cover " (p141)
" 4.7.5 ADF Cover Stacker/ADF Document
" 4.7.7 ADF Document Support Assy " (p145)
Flowchart 4-2. Disassembling Flowchart (2)
Disassembly Procedures
Disassembling the ADF Unit
Start
Unit " (p135)
" 4.7.3 ADF LD Frame Assy " (p141)
Support Cover " (p143)
" 4.7.6 ADF Front Cover " (p144)
" 4.7.8 ADF Frame Unit " (p145)
" 4.7.10 ADF PF Roller " (p148) " 4.7.9 ADF Motor Unit " (p146)
You need to remove the parts/units shown in dashed line box if they exist on
C H E C K
the way to the target part/unit.
P O I N T
For the disassembling procedures of the Scanner Unit and the ADF Unit, see
Flowchart 4-1 Disassembling Flowchart (1)
The ADF Unit can be removed individually before the procedure of
removing the Scanner Unit/ADF Unit. See
(p95).
" 4.7.1 ADF Hinge " (p139)
(p92).
4.3.3 Scanner Unit/ADF Unit
Revision A
93
Confidential