Front Paper Guide - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

4.5.18 Front Paper Guide

Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/Middle Cover/Printer Mechanism/
Card Slot Cover/Main Board Unit/Left Frame/Front Frame/Right Frame/CR
Motor/CR Scale/Hopper/Main Frame Assy/ASF Unit/Ink System Unit/Star Wheel
Holder Assy/EJ Roller
Removal procedure
When removing the Front Paper Guide, be cautious not to damage
C A U T I O N
the ribs on the upper surface of the Front Paper Guide.
Figure 4-104. Ribs of the Front Paper Guide
1. Remove the screws (x2) that secure the Front Paper Guide.
Front Paper Guide
1
Figure 4-105. Removing the Front Paper Guide (1)
DISASSEMBLY/ASSEMBLY
Ribs
2
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)
Disassembling the Printer Mechanism
2. Release the hook (x1) of the Front Paper Guide, and remove the Front Paper
Guide.
Figure 4-106. Removing the Front Paper Guide (2)
When installing the Front Paper Guide, be cautious not to
damage the PF Roller.
Install the Front Paper Guide so that the Grounding Spring
comes outside of the hook of the Front Paper Guide.
Confirm that the leg of the Pad Front Paper Guide is not
caught between the Front Paper Guide and Base Frame.
Leg of Pad Front Paper Guide
Correct Position
Figure 4-107. Installing the Front Paper Guide
Tighten the screws in the order given in
After replacing the Front Paper Guide, be sure to perform the
A D J U S T M E N T
R E Q U I R E D required lubrication.
• Chapter 6 " MAINTENANCE" (p.163)
Revision A
Front Paper Guide
Hook
Grounding Spring
Hook
Incorrect Position
Figure. 4-105.
132
Confidential