Scanner Carriage Unit - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
Check the following points when installing the Upper Scanner
Housing.
Route the grounding wire to the position as shown in the figure
below.
Figure 4-120. Setting position of the grounding wire
When installing the Upper Scanner Housing, align the inside of
the ribs (x3) on the Upper Scanner Housing with the ribs (x3)
on the Lower Scanner Housing as shown below.
Figure 4-121. Installing the Upper Scanner Housing
DISASSEMBLY/ASSEMBLY
Grounding wire
Upper Scanner Housing
Lower Scanner Housing
Disassembling the Scanner Unit

4.6.3 Scanner Carriage Unit

Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Scanner Housing
Removal procedure
Do not scratch the Rod Lens Array when removing the Scanner
C A U T I O N
Carriage Unit.
Figure 4-122. Handling the Scanner Carriage Unit¢
1. Move the Scanner Carriage Unit to the center.
Rib
Figure 4-123. Moving the Scanner Carriage Unit
Rod Lens Array
Scanner Carriage Unit
Revision A
137
Confidential