Rear Wheel Sensor Open Circuit/Short Circuit; Pinpoint Tests - Triumph Thunderbird Service Manual

Hide thumbs Also See for Thunderbird:
Table of Contents

Advertisement

Rear Wheel Sensor Open Circuit/Short Circuit
Fault Code
Possible cause
Action
C1613
Rear wheel speed sensor circuit fault
Ensure ABS ECM connector is secure.
Ensure wheel speed sensor connector
is secure.
Disconnect ABS ECM connector and
proceed to pinpoint test 1:
Pinpoint Tests
Test
Result
Action
1
Check cable and terminal integrity:
OK
Proceed to test 2
- ABS ECM connector pin 2 and ABS ECM Faulty
Rectify fault, proceed to test 9
connector pin 18
2
Check cable for short circuit:
OK
Proceed to test 4
- ABS ECM connector pin 2 and Ground
Short circuit
Proceed to test 3
3
Disconnect the front wheel speed sensor OK
Replace the wheel speed sensor, proceed to
connector. Check cable for short circuit:
test 9
- Wheel speed sensor connector pin 2 Short circuit
Locate and rectify wiring harness fault,
(motorcycle harness side) and Ground
proceed to test 9
4
Check cable for short circuit:
OK
Proceed to test 6
- ABS ECM connector pin 18 and Ground
Short circuit
Proceed to test 5
5
Check cable for short circuit:
OK
Replace the wheel speed sensor, proceed to
test 9
- Wheel speed sensor connector pin 1 Short circuit
Locate and rectify wiring harness fault,
(motorcycle harness side) and Ground
proceed to test 9
6
Check cable continuity:
OK
Proceed to test 7
- ABS ECM connector pin 2 and Wheel Open circuit
Locate and rectify wiring harness fault,
speed sensor connector pin 2 (motorcycle
proceed to test 9
harness side)
7
Check cable continuity:
OK
Proceed to test 8
- ABS ECM connector pin 18 and Wheel Open circuit
Locate and rectify wiring harness fault,
speed sensor connector pin 1 (motorcycle
proceed to test 9
harness side)
8
Reconnect the front wheel speed sensor 3 mA to 14 mA
Proceed to test 9
connector. Check the wheel speed sensor
operation:
-
Connect
a
suitable
voltage
supply Faulty
Replace the wheel speed sensor, proceed to
between 4.5 Vand 16 v between ABS ECM
test 9
connector pin 2 (positive) and pin 18
<negative),
and
measure
the
current
consumption of the wheel speed sensor
Test continued overleaf
Service Manual - Thunderbird
12.55

Advertisement

Table of Contents
loading

Table of Contents