Removal; Installation; Mirrors - Triumph Thunderbird Service Manual

Frame and Bodywork
Mirrors Installation
Removal
1. Remove the mirror screw and collect the wavy
washer.
2.
Using a twisting action, remove the mirror in an
upwards direction.
3. Remove and discard the tolerance ring.
1. Push a new tolerance ring into the recess in the
mirror mounting location.
2. Insert the mirror into the tolerance ring.
3. Working from below the mirror, carefully position
Triumph service tool T3880007 centrally over the
mirror stem bore with the handle of the tool angled
downwards.
a--
2
1--4
1. Mirror
2. Tolerance ring
3. Wavy washer
4. Mirror screw
1-
5
1. Tolerance ring
2. Mirror mounting location
3. Tool T3880007
4. Wavy washer
S. Mirror screw
4. Fit and tighten the mirror screw to 10 Nm whilst
ensuring that the tolerance ring is drawn evenly into
the hole in the mirror stem bore.
5. Remove the screw and tool. Ensure that the mirror
stem has approximately 1.5 mm pull through visible
underneath the mirror stem bore.
6.
Fit the wavy washer and re-tighten the mirror screw
to 10 Nm.
17.12
Service Manual - Thunderbird