System Voltage; Pinpoint Tests - Triumph Thunderbird Service Manual

System Voltage
Fuel System/Engine Management
Fault Code Possible cause
Action
P0560 Bike Voltage system fault
View
&.
note diagnostic software
'sensor' data.
Ensure Voltage across battery is
acceptable, note Voltage.
Disconnect ECM and proceed to
pinpoint test 1:
Pinpoint Tests
Test
Result Action
1
Check cable and terminal integrity:
OK Proceed to test 2
- ECM pin A20
Faulty Rectify fault, proceed to test 3
- EMS relay pin 5
2 With Ignition 'on', check Voltage at: Same
as
'across Proceed to test 3
battery' Voltage
- ECM pin A06
Less than 'across Locate and rectify wiring fault, proceed to
battery' Voltage
test 3
3 Reconnect harness, clear fault code and run
OK
Action complete - quit test
engine to verify fault cleared
Fault still present Contact Triumph service
SelVice Manual - Thunderbird
10.51