Installation - Triumph Thunderbird Service Manual

Fuel System/Engine Management
10. Slide the link pipe on to the left hand header pipe. 15. Release the fixing securing the catalyst box to the
frame.
Note:
• The catalyst box is secured to the frame by a
single fixing on the right hand side, and is
located on a stud and grommet on the left
hand side.
1
1
Installation
1. Check and if necessary renew the catalyst mounting
box grommet Fit the mounting grommet to the
mounting point on the catalyst box.
2. Locate the catalyst box to the mounting stud on the
left hand side. Insert the flanged sleeve into the right
hand grommet and then fit the bolt and washer to
retain the assembly.
cfmk
1. Catalyst box
2. Fixing
3. Left hand mounting
16. Detach the catalyst box from its mounting by easing
it to the right hand side of the motorcycle.
Note:
• The catalyst box mounting grommet may
remain in the catalyst box or may adhere to
the mounting stud on removal of the catalyst
box.
1Z Collect the catalyst box mounting grommet.
/
2~~
1\1
1. Header downpipe
2. Fixings
13. With the aid of an assistant, detach and remove both
header pipes.
14. Collect the header gaskets from the head. Remove
the header pipe to catalyst box gaskets from the
headers.
cfml
r.fmn
1. Link pipe
2. Link pipe clamps
3. Link pipe removal direction
4. Right hand oxygen sensor connection (marked with
red tape)
S. Left hand oxygen sensor connection
11. Release the clamps securing the headers to the
catalyst box.
12. At the cylinder head, release the nuts securing the
header pipes to the head.
cfmk
1. Catalyst box
2. Left hand mounting
3. Bolt/washer
SelVice Manual - Thunderbird
10.119