Clutch Cover; Removal; Clutch - Triumph Thunderbird Service Manual

Clutch
10. Set the final adjustment of the cable to give
1 - 2 mm of free play at the lever by turning the
adjuster nut and locknut at the lever end. Secure the
setting with the knurled locknut.
c1gp
1. Clutch lever
2. Correct setting, 1 - 2 mm
11. Refit the radiator cowl and tighten the fixing to
4Nm.
12. Reconnect the battery, positive (identified with red
tape) lead first.
13. Refit the rider's seat (see page 17-9).
Clutch Cover
Removal
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1. Disconnect the clutch cable at the clutch cover (see
page 4-4).
2. Release the fixing and disconnect the gear change
actuator arm at the clutch cover.
cfui
1. Gear change actuator arm
2. Fixing
3. Release the two bolts and remove the left hand
control plate assembly.
1. Control plate assembly
2. Bolts
4.6 SelVice Manual - Thunderbird