Clutch Cable; Removal - Triumph Thunderbird Service Manual

Clutch
Clutch Cable
Removal
5. Slacken the cable locknut and release the adjuster
adjacent to the radiator to give maximum play in the
cable.
cfug
~
1. Clutch cable
2. Boot
3. Actuating arm
4. Fixing
5. E-c1ip
cfuh
1. Clutch cable
2. Adjuster
3. Locknut
6. Detach the clutch cable boot and slide it up the inner
cable to allow access to the E-c1ip on the clutch cable
outer. Remove the E-c1ip.
7. Release the fixing and detach the clutch actuating
arm from the clutch shaft. Rotate the arm to remove
it from the clutch cable.
8. Release the clutch cable from the boss on the clutch
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1. Remove the rider's seat (see page 17-8>.
2. Disconnect the battery, negative (black> lead first.
3. Release the fixing and remove the radiator cowl.
cfmp
1.
Radiator cowl
2. Fixing
4. Release the fixing and remove the cable retaining
bracket from the lower crankcase, located to the left
of the sump.
cfmp
1. Clutch cable
2. Cable retaining bracket
4.4
Service Manual - Thunderbird