Triumph Thunderbird Service Manual page 162

Engine Removal and Refit
Partially withdraw the lower rear engine
mounting bolt and tighten the frame adjuster to
5 Nm using service tool T3880103. Refit the
bolt and washer.
Partially withdraw the upper rear engine
mounting bolt and tighten the frame adjuster to
5 Nm using service tool T3880103. Refit the
bolt and washer.
4~
~~~~
~
1
~
-
~"
1. Engine mounting adjuster
2. Tool T3880103
Partially withdraw the cylinder head engine
mounting bolt and tighten the frame adjuster to
5 Nm using service tool T3880103. Refit the
bolt and washer.
Fit new nuts to all four engine mounting bolts.
Tighten the cylinder head engine mounting
bolt and nut to 48 Nm.
Tighten the upper rear engine mounting bolt
and nut to
80 Nm.
Tighten the upper rear engine mounting bolt
and nut to 80 Nm.
Tighten the front engine mounting bolt and nut
to 80 Nm.
4. Reconnect the remaining electrical connections to
the engine. These include:
Low oil pressure warning light switch;
Crankshaft position sensor;
Gear position sensor;
Road speed sensor;
Coolant temperature sensor;
Battery earth;
Alternator.
9.6
SelVice Manual - Thunderbird