System Diagnostics; Diagnostic Tool Connection - Triumph Thunderbird Service Manual

System Diagnostics
The ABS system has an on-board diagnostics feature
which allows service technicians to retrieve stored data
from the ECM using Triumph diagnostic software.
Full
details of the Triumph diagnostic software operation
and how to interpret the results are given in the
Triumph Diagnostic Tool User Guide.
The software is connected, via an interface cable, to the
motorcycle using a dedicated diagnostic plug situated
beneath the left hand side panel. By using a dedicated
plug, no electrical connectors associated with the system
are disturbed, reducing potential connector damage.
The software allows the user to retrieve data associated
with the system sensors and actuators, test various
component functions, read build data and make minor
adjustments to the set-up of the system. The data and
tests available are described on the following pages.
Diagnostic Tool Connection
1. To connect the Triumph diagnostic interface to the
motorcycle, remove the left hand side panel (see
page 17-9) and release the diagnostic connector
from its locating tang.
cfsg
1.
Diagnostic connector
2. Plug the diagnostic interface directly in to the
diagnostic connector.
Diagnostic Interface
3. When the diagnostic session is completed,
disconnect the Triumph diagnostic interface.
4. Refit the diagnostic connector to its locating tang and
refit the side panel (see page 17-9).
12.42
Service Manual - Thunderbird