Disassembly - Triumph Thunderbird Service Manual

cfyq
1. Rear brake hose union
2. Bracket
3. Fixings
Disassembly
1. Release the rear brake hose union on the side of the
modulator assembly.
2. Release the three fixings and remove the bracket
from the modulator.
elys
1. Modulator assembly
2. Fixings
3. Removal direction
16. Disconnect the ABS modulator multiplug (see page
12-47>.
1Z Feed the rear brake hose through the bracket and
remove the modulator assembly from the
motorcycle.
14. Remove the two rearmost bolts on the ABS
modulator bracket, and loosen the two remaining
bolts.
15. Slide the modulator and brake hard-lines rearwards
as an assembly to release it from the bracket, and
then lower the assembly downwards through the
bracket.
11. Remove the front brake hard-line union block fixing
from the crankcase.
elyu
1. Centre hard hard-line clamp
2. Fixing
13. Disconnect the hard-line from the rear master
cylinder (discard the sealing washers).
)
SelVice Manual - Thunderbird
12.35