Adaption Status - Triumph Thunderbird Service Manual

Fuel System/Engine Management
Inputs
The data available under Inputs is:
Item Checked Result Unit
EMS Main relay status
relay on/off
Fuel pump relay status on/off
Starter relay status starter on/off
Starter switch status
switch on/off
e stand status up/down
Fall detection status normal/over
Clutch switch status
release/grip
Neutral switch
gear/neutral
Gear position numeric value or neutral
Vehicle speed km/h
Malfunction indicator light status
MIL
on/off
Cooling fan status fan on/off
Calculated load
%
Purge valve duty cycle
%
Adaption status
Because the fuel system is adaptive, the engine management system is able to automatically adjust to new working
conditions, such as changes in altitude, component wear, air leaks etc. This screen displays information on the adaption
status of the vehicle which will show if it has adapted or not.
Function Examined Report Method
Closed Thrott1e Position Adapted adapted/not adapted
~dle
speed control adaption status
%
Oxygen sensor 1 adaption range (off idle)
%
Oxygen sensor 1 adaption range <idle)
%
Oxygen sensor 1 adaption status (off idle)
0/0
Oxygen sensor 1 adaption status (idle)
0/0
Oxygen sensor 2 adaption range (off idle)
%
Oxygen sensor 2 adaption range (idle)
0/0
Oxygen sensor 2 adaption status (off idle)
0/0
Oxygen sensor 2 adaption status (idle) %
SelVice Manual - Thunderbird
10.27