Top Yoke; Removal; Installation - Triumph Thunderbird Service Manual

Front Suspension
Top Yoke 6. Slacken and remove the top nut and washer. Lift and
remove the top yoke.
~=:--"(
~=~'(
1. Top nut
cfbm_2\
1.
Top nut
3. Tighten the top yoke clamp bolts to 20 Nm.
4. Install the handlebars (see page 13-14).
5. Refit the cable guides and tighten the fixings to
18Nm.
6. Reconnect the battery, positive (identified with red
tape) lead first.
Z Refit the rider's seat (see page 17-9).
1.
Seat the top yoke in to position.
2. Refit the washer and top nut, tightening it to
6SNm.
Installation
2
1. Remove the rider's seat (see page 17-8>.
2. Disconnect the battery, negative (black) lead first.
3. Remove the handlebars (see page 13-13).
4. Slacken the top yoke clamp bolts.
Removal
('fil'l
1.
Cable guides
2. Cable guide fixings
• Make a note of the cable routings behind the
cable guide.
5. Release the screws and detach the two cable guides.
13.16
SelVice Manual - Thunderbird