Optional Settings - Unify Wireless Service Gateway WSG Administrator Documentation

Installation and Configuration

Optional Settings

1) Log on to the WSG.
The setup wizard will open and help you with the basic configuration. The setup wizard in-
cludes the following settings:
• Network setup – can be set manually or via DHCP
• License number – the type of license determines the functionality
• Date and time properties/settings – for time stamps on activities
• Central Phonebook properties – database to use when searching (local phonebook on the
module, or LDAP server).
• LDAP properties – (only visible if LDAP is selected in the Central Phonebook properties)
• Digit Manipulation Properties – information on how to convert telephone numbers (only
visible if LDAP is used as database
• Passwords – change from default to site specific passwords
2) Configure the Central phonebook (but only if an LDAP server is not used), see
Central Phonebook
3) Create a security backup.
4) We recommend you to create a security backup of all settings (to facilitate the configuration in
case of a software upgrade). See
Optional Settings
Some of the optional settings in the module are included in the basic license, other requires an
additional license. See
• Set Language – it is possible to translate the user interface language, refer to
Language on page 76.
• Open Access Protocol (OAP) – makes it possible to communicate with other systems that is
connected to the module. Refer to
• Digit Manipulation – makes it possible to set the way telephone numbers are converted in
telephone number lists. See
10
on page 20.
Backup the Configuration
How to use this Document
Open Access Protocol (OAP)
Digit Manipulation in Central Phonebook
Wireless Service Gateway WSG, Administrator Documentation
on page 28.
on page 7.
on page 73.
on page 33.
A31003-M2000-M105-01-76A9, 29/06/2020
Configure the
Customize the