5-25. Dial Assembly Replacement
Outline
Replacement
1. Removing the Rear Cover
2. Removing the Dial Assembly
3. Attaching the Dial Assembly
4. Reattaching the Rear Cover
Adjustment after Replacement
5. Confirming the Search Dial Operation (Refer to Section 3-3-3.)
[F1] (DIAL) of the PANEL CHECK menu
Preparation
1. Turn the power off and disconnect the power cord.
2. Remove the control panel assembly. (Refer to Section 1-6.)
Removal
1. Removing the Rear Cover
Remove the eight screws and remove the rear
cover.
2. Removing the Dial Assembly
(1) Disconnect the harness from the dial assem-
bly.
(2) Remove the dial knob rubber.
(3) Remove the screw and remove the dial knob.
(4) Remove the three screws and remove the dial
assembly.
5-92
PSW2.6 x 5
BVTP3 x 8
Dial knob
Dial knob rubber
Remove the Dial Assembly
B3 x 6
Rear cover
Dial assembly
Key panel frame
SRW-5000/5500
B3 x 6