Sony SRW-5000 Maintenance Manual page 242

Removal
1. Disconnecting the Harnesses
(1) Release the bundling band.
(2) Disconnect the harnesses from the four
connectors CN216, CN231 and CN233 on the
HN-268 board.
2. Removing the Pinch Press Assembly
(1) Remove the screw.
(2) Remove the pinch press assembly from the
MD base assembly.
Installation
3. Attaching the Pinch Press Assembly
(1) Align the sloted hole of the pinch press
assembly with the pin of the MD base
assembly
(2) Fix the pinch press assembly with one screw.
Tightening torque : 78.4 x 10
{8.0 kgf.cm}
4. Reconnecting the Harnesses
(1) Reconnect the harnesses to the four connec-
tors CN216, CN231 and CN233 on the HN-
268 board.
(2) Fix the harnesses with the bundling band (or
an equivalent) avoiding contact to the drive
portion of the gearbox assembly.
5-36
Pinch press assembly
_2
N.m
Bundling band
CN216
CN231
Sloted hole
Pin
Remove/Attach the Pinch Press Assembly
CN233
HN-268 board
PSW3 x 8
SRW-5000/5500