Sony SRW-5000 Maintenance Manual page 390

2. Open the AE-31H board. (Refer to Section 5-1-2.)
3. Turn on the power.
4. Check that this unit is set to the 59.94 Hz mode.
If it does not, change the system setting referring to Section 7-1-3.
5. Set the VTR's buttons and setup menu as follows:
Location Item
Upper control panel REMOTE
Lower control panel PB LEVEL button
Setup menu
HOME menu
TC menu
7-14
Customer setting
______________ 8 OFF (Light off)
1 (9P)
______________ 8 OFF (Light off)
2 (50P)
3 (Ethernet) ______________ 8 OFF (Light off)
CH1 ______________ 8 PRESET
CH2 ______________ 8 PRESET
CH8 ______________ 8 PRESET
ITEM-109 (KEY INHIBIT) ____________
[F2] (REC INH)
____________
[F1] (TIME SEL)
____________
[F5] (TCR SEL)
____________
[F6] (REGENE SOURCE) ____________
[F7] (TGC MODE)
____________
[F8] (RUN MODE)
____________
Setting at adjustment
8 OFF
8 OFF
8 TC
8 LTC
8 int-L
8 regene
8 rec
SRW-5000/5500