Ltc System Alignment And Full Erasure Current Check (Tc-104 Board); Adjustment Overview - Sony SRW-5000 Maintenance Manual

8-8. LTC System Alignment and Full Erasure Current Check
(TC-104 Board)

8-8-1. Adjustment Overview

When the TC-104 board is repaired or replaced, perform the time code system alignment.
n
Check that the unit sets into the 59.94 Hz mode. If it does not, change the system setting referring to
Section 8-1-3.
Tools
To perform the time code system alignment for the VTR, prepare the following equipment (or equivalent)
and fixtures.
Oscilloscope TEKTRONIX TDS3054B
Audio analyzer AUDIO PRECISION System One (SYS-22A)/Two (SYS-2022A)
Alignment tape HR5-1B
Recording tape SONY BCT-SR series (HDCAM SR cassette: Separately available)
n
Use the blank tape erased using a tape eraser in advance or a new blank tape as a recording tape for the adjustment.
8-34
(Part No. 8-960-076-41)
SRW-5000/5500