Audio/Video Check Menu - Sony SRW-5000 Maintenance Manual

3-3-8. AUDIO/VIDEO CHECK Menu

The AUDIO/VIDEO CHECK menu is used to set the
system EE function of the maintenance mode and the
operations of the audio/video test signal generator built in
this unit for the maintenance mode.
To display the AUDIO/VIDEO CHECK menu, press the
[F8] (A/V CHECK) key on the MAINTENANCE menu.
n
The changed setting is retained until you exit the AUDIO/
VIDEO CHECK menu or the setting is changed again.
The settings are set to OFF when the AUDIO/VIDEO
CHECK menu starts up.
SYSTEM A/V CHECK
F1
EE
VIDEO
F2 SYSTEM EE
TST SG
VIDEO TEST SG : OFF
AUDIO TEST SG : OFF
F3
AUDIO
TST SG
F4
TG
DIAG
STATUS
ALT F5 F6 F7
[F1] (SYSTEM EE) Key
Sets the system EE function of the maintenance mode.
[F2] (VIDEO TST SG) Key
Select a HD video test signal to be generated from the
built-in video test signal generator of this unit.
[F4] (AUDIO TST SG) Key
Select a test signal to be generated from the built-in audio
test signal generator of this unit.
[F5] (TG STATUS) Key
Displays the status of the time code generator built in this
unit.
[F10] (EXIT) Key
Exits the AUDIO/VIDEO CHECK menu and returns to the
MAINTENANCE menu.
SRW-5000/5500
: BYPASS EE
EXIT
F8 F9 F10
[F1] (SYSTEM EE) Key
Selects enable/disable of the system EE function of the
maintenance mode.
When the system EE function is enabled, selects a signal
path.
n
When enabling the system EE function, be sure to eject a
cassette tape.
Setting system EE
On the AUDIO/VIDEO CHECK menu, press the [F1]
(SYSTEM EE) key several times to select one of the
following signal paths for the system EE.
BYPASS EE: Normal state (Non system EE state)
SYSTEM EE1: Loops back the video signal from IC800
(BRR ENCODER) on the IRC-5/IRC-5A
board to IC300 (BRR DECODER) on the
HPR-8/HPR-8A board.
SYSTEM EE2: Loops back a video signal on the EQ-94
board.
SYSTEM A/V CHECK
F1
EE
VIDEO
BYPASS EE
F2 SYSTEM EE
TST SG
SYSTEM EE1 VIDEO TEST SG : OFF
AUDIO TEST SG : OFF
SYSTEM EE2
F3
AUDIO
TST SG
F4
TG
DIAG
STATUS
ALT F5 F6 F7
: BYPASS EE
EXIT
F8 F9 F10
3-45