Sony SRW-5000 Maintenance Manual page 145

Setting SNMP IP Address
1. On the NETWORK SETUP menu, press the [F3]
(SNMP IP SET) key to display the SNMP IP AD-
DRESS SETUP menu.
READ SNMP IP SETUP
F1
ONLY
Read Only Host IP –
READ
F2 Read/Write Host IP –
WRITE
Trap1 IP Address
Trap2 IP Address
TRAP1
Trap3 IP Address
F3 IP
Trap4 IP Address
TRAP2
IP
F4
TRAP3 TRAP4
DIAG
IP IP
ALT F5 F6 F7
2. Press the function key corresponding to an item to be
set.
[F1] (READ ONLY) Key: Sets a read-only host IP
[F2] (READ WRITE) Key: Sets a read/write host IP
[F3] (TRAP1 IP) Key:
[F4] (TRAP2 IP) Key:
[F5] (TRAP3 IP) Key:
[F6] (TRAP4 IP) Key:
n
When an IP address is set for the [F1] (READ ONLY) or
[F2] (READ WRITE) key, an SNMP trap is sent to the IP
address.
When it is necessary to send an IP trap to another ID
address, set IP addresses of the [F4] to [F6] keys.
SRW-5000/5500
. . .
. . .
– . . .
– . . .
– . . .
– . . .
CANCEL SAVE EXIT
F8 F9 F10
address.
address.
Sets a network IP address
to receive an SNMP trap.
Sets a network IP address
to receive an SNMP trap.
Sets a network IP address
to receive an SNMP trap.
Sets a network IP address
to receive an SNMP trap.
3. Set a value using numeric keys or [&]/[*] keys.
n
Pressing the [CLR] (CLEAR) key returns all the
values to "0".
READ SNMP IP SETUP
F1
ONLY
Read Only Host IP –
READ
F2 Read/Write Host IP –
WRITE
Trap1 IP Address
Trap2 IP Address
TRAP1
Trap3 IP Address
F3 IP
Trap4 IP Address
TRAP2
IP
F4
TRAP3 TRAP4
DIAG
IP IP
ALT F5 F6 F7
4. Press the [F9] (SAVE) key to save the set values.
. When the saving is completed, the set values are
deselected and displayed.
n
When a value is not set, no set value is displayed.
. To cancel the setting, press the [F8] (CANCEL) key
to return to the SNMP IP ADDRESS SETUP menu.
5. Press the [F10] (EXIT) key to return to the NET-
WORK SETUP menu.
0. 0. 0. 0
. . .
– . . .
– . . .
– . . .
– . . .
CANCEL SAVE EXIT
F8 F9 F10
3-51