Sony SRW-5000 Maintenance Manual page 243

5. Confirming the Pinch Press Clearance
(1) Turn the M gear of the gearbox assembly by
manual to set to the threading end state.
(2) Press the iron core of the pinch solenoid in
the pull-in direction and confirm that the
clearance between the press arm (A) and (B)
is met the specification.
Adjustment after Replacement
6. Confirming the Pinch Roller Solenoid
Operation
Refer to Section 3-3-4.
[F3] (PINCH PLG) of the ALT SERVO CHECK
menu
7. Adjusting the Tape Running at Drum
Exit Side
Refer to Section 6-12-2.
SRW-5000/5500
• Threading end mode
Pinch solenoid
M gear (In the pinch press assembly)
A
A
Spec : A = Clearance exists
Confirm the Pinch Press Clearance
Press arm (B)
Iron core
Press arm (A)
5-37