Reel Shift Motor Replacement - Sony SRW-5000 Maintenance Manual

5-14. Reel Shift Motor Replacement

When a reel shift motor needs replacing, replace the whole motor holder assembly.
Outline
Replacement
1. Removing the Reel Motor Assemblies (Refer to steps 1 to 4 in Section 5-13.)
2. Removing the Motor Holder Assembly
3. Attaching the Motor Holder Assembly
4. Reattaching the Reel Motor Assemblies (Refer to steps 5 to 11 in Section 5-13.)
Adjustment after Replacement
5. Confirming the Reel Shift Motor Operation
6. Confirming the Tape Running at Drum Entrance Side (Refer to Section 6-12-1.)
Preparation
1. Turn the power off and disconnect the power cord.
2. Remove the upper lid (front) assembly. (Refer to Section 1-3-1.)
3. Remove the cassette compartment. (Refer to Section 1-5.)
Removal
1. Removing the Reel Motor Assemblies
Remove the reel motor assemblies of the S side
and T side.
(Refer to steps 1 to 4 in Section 5-13.)
5-52
SRW-5000/5500